If you are the person who loves to work with sheet metals – a DIYer or a trade professional, then this post is dedicated to you.
Here we will discuss all the aspects of performing the cutting for spot weld.
Before dig in deeper, let us see
What is a Spot Weld?
It is a form of ‘resistance welding.’ Spot welding is one of the oldest welding techniques where two or more metal sheets are welded without any filler material.
I will drive you through complete technical & pricing comparisons.
QUICK PICKS
Here are my recommended products picked out through amazon you would be interested in depending on your budget…
Quick Navigation
Spot Weld Drill Bits Reviews | Top Rated
The main feature to consider while choosing a spot weld cutter is the precision that you required at your workpiece. Then comes the number of spots you need to remove.
In the end, you are going to disconnect the metal sheet without damaging it. The spot with coming out as a chunk of both/or more sheets.
Essential parts of a Spot Weld Drill Bits are;
- Double-Sided Rotatory Blade
- Spring-Loaded Pin
You also need Grinder, a Stub drill bit to make a punch.
1. ABN Spot Weld Drill Bit
Here is what I really like about this product;
- This is HSS Cobalt Titanium Coated Welding Remover Bit
- You can drill into much harder steel materials and even in stainless steel easily
- The Aluminum carrying case and internal foamy tray help safe storage and quick organization through numbering on bits.
2. Neiko Spot Weld Drill Bits
Here is what I really like about this product;
- A special grade HSS cobalt mix that gives a long life against hard weld spot material
- Titanium coating withstands high a temperature that forms during metal cutting
- Precise pilot tip helps quick action and prevents and wandering
- It has the most commonly used sizes 8mm bit at 1-3/4″ (45mm) length that covers the automobile industry.
3. EEEKit Spot Weld Cutter Kit
Here is what I really like about this product;
- It has sharp double-sided blades that you can use during a heavy duty job.
- It is made of HSS material, highly reliable, and wear-resistant.
- It separates the spot-welded sheet metals, panels, where it is not easy to access.
- It alleviates any need to pry and break welds.
4. Spot Weld Cutter Kit | 3/8 Inch Drill Bit Tools
Here is what I really like about this product;
- It has a 3/8″ Diameter cutting Blade that is Ideal for Removing Spot Welds
- You can use it for Cast Iron, Iron, steel alloys, plain carbon steel, tools die steel, die grinders, drill holes, auto body renovations, etc.
- It is made of high-quality heat resistant steel
5. Rotary Spot Weld Cutter Remover Drill Bits
Here is what I really like about this product;
- It has a 3/8″ perfect diameter cutting Blade that is Ideal for Removing Spot Welds
- This spot welds remover is compatible with the most 1/4″ drills, arbor with flats to eliminate spinning in the chuck.
- It is heavy-duty stuff and made of high-quality heat resistant steel
I hope this is quite helpful in choosing spot weld. Let see some more detail on what to consider while choosing a drill bit cutter or a spot weld remover drill bit.
- It should remove a spot weld in a shot.
- No wandering is good for a clean outcome.
- No wobbling as we will try to get a stub drill.
- It should not spin in the chuck of the drill machine in any case.
See your project requirements like budget, duration, and the number of holes you need to make. I recommend grabbing the full set, including the drill machine and drill bits, for spot removal.
How to Use a Spot Weld Drill Bit?
The process is quite simple.
Step – 1: First of all, locate and mark the weld spot
Step – 2: Measure the surface area.
Step – 3: Evaluate the base metals’ chemistry well.
Step – 4: Select the right sized Hole saw, Drill bit, or cutter.
Step – 5: Don’t apply the pressure & let the machine work automatically
Step – 6: Read the manual also
Video Guide
FEATURED POSTS
- Deck Awnings with Mosquito Netting - December 10, 2022
- Retractable Side Awning for Patio - December 10, 2022
- Best Soldering Iron for Automotive Wiring - December 2, 2021