With an ever-increasing need to have a high-pressure water supply, it is becoming quite common for people to buy specialized water pumps to help them with their daily household chores that require a good amount of water.
But getting a water pump can be a bit tricky. There’s a lot of science stuff going on behind the scenes. This makes it hard to identify the one that suits your requirements.
And so, here you will find all the guidance that would make it easy for you to choose a suitable pump. Below is a list of the 10 best pumps, along with a buying guide to help you get the hang of how water pumps work.
QUICK PICKS
Here are my recommended products picked out through amazon you would be interested in depending on your budget…
10 Long Distance Water Pumping Setup Reviews
Here is my list of the Best Thermostat for Heat Pump with Auxiliary Heat in 2022;
1. DC HOUSE Industrial Water Pressure Pump
- Max Pressure: 45 psi
- Max Head: 98 feet
- Flow Rate: 3.3 GPM
- Suction Lift: 9.8 feet
- Pressure and Flow can be adjusted to different levels
- It can be installed easily
- Turns off automatically when the pump overheats
- Can only pump clean water
Overview
The DC House 33 is a powerful diaphragm water pump with self-priming capabilities and a wide variety of usage, including support for showers, garden sprinklers, irrigation, and even faucets.
It has a sufficient flow rate of 3.3 GPM, and the suction lift is 9.8 feet along with a head of 98 feet. Also, the maximum pressure that it offers is 45 psi at a power supply of 115 V AC. With these specifications, you can rest assured that the pump can supply water at incredibly long distances.
With DC House water pump, you don’t have to work with one pressure value throughout. This means that the pump has a lot of flexibility in terms of pressure settings, and you can adjust that through the pressure switch located on top of the lid.
Turning it clockwise increases pressure while reducing flow, and anticlockwise rotation does the opposite.
Finally, the pump has a self-defense mechanism whereby it automatically turns off whenever it starts overheating.
2. TecHome Water Portable Utility Pump
- Horse Power: 1/10 HP
- Max Head: 27 feet
- Flow Rate: 330 GPH
- Suction Lift: 6 feet
- It can be used for several things
- Durable
- Lightweight
- The instruction manual can be a bit confusing
Overview
Having a wide variety of applications, the TecHome water pump is an efficient system that will provide you with an uninterrupted water supply throughout day and night.
It comes with a horsepower of 1/10 and works on a power supply of 115 V. In addition, the TecHome water pump has a maximum flow rate of 330 GPH with a maximum head of 27 feet.
On the other hand, the suction lift is 6 feet, with the suction port measuring around three-fourth of an inch. Similarly, the discharge port measures ¾th of an inch as well.
You also get an extra kit to replace the impeller.
Lastly, coming down to what the pump can be used for, you will be happy to know that this pump can do anything from cleaning aquariums and swimming pools to fixing clogged sinks, watering lawns, and much more. You can even use it to wash your car!
3. MEDAS Portable Utility Water Transfer Pump
- Horse Power: 1/10 HP
- Max Head: 44 feet
- Flow Rate: 330 GPH
- Suction Lift: 6 feet
- Resistant to wear and tear
- Portable
- Comes with an impeller replacement kit
- It can be a bit noisy
Overview
The MEDAS self-priming water transfer pump is an excellent tool to add to your water pumping setup with a state-of-the-art, portable and elegant design.
It is the perfect appliance to fulfill all your water supply needs efficiently and conveniently.
The pump works on a power supply of 115 V and comes with a horsepower rating of 1/10.
It has a flow rate of 330 GPS while having a maximum head of 44 feet. The suction lift measures 6 feet.
But the best thing about this pump is its durability. This is because it is coated with carbon steel, and the impeller is made out of NBR rubber.
In fact, the hose of the connectors is metallic. This makes the system quite resistant to wear and tear.
In addition, the head of the pump is made out of zinc alloy, with the pump itself having a wise and steady base that prevents it from wobbling a lot during operation.
There’s also a handlebar at the top, which allows you to carry it easily to wherever you like.
The pump also features a filter which is perfect for refilling aquariums and pools with clean water.
4. Trupow Mini Portable Electric Utility Sump Transfer
- Horse Power: 1/10 HP
- Max Head: 39 feet
- Flow Rate: 330 GPH
- Voltage: 115 V
- Ideal for everyday use
- Value-for-money
- Comes with metal hose connectors
- The output water stream can be a bit shaky
Overview
The Trupow Portable water pump is ideal for just starting with their water pumping setups.
It is simple to use and comes with handy features that will give you the comfort you deserve.
Made out of strong stainless steel and featuring metal hose connectors instead of the usual plastic ones, the pump runs on 1/10 HP and has a flow rate of 330 GPH.
The power supply that it requires is 115 V, and the maximum head of the pump is 39 feet.
It can be used for several things, such as draining out your aquariums, waterbeds, and sinks that may be clogged.
5. VIVOSUN Long Distance Water Transfer Pump
- Horse Power: 1/10 HP
- Max Head: 39 feet
- Flow Rate: 330 GPH
- Voltage: 115 V
- Made out of aluminum
- Features a handlebar
- Very easy to install and use
- A bit expensive.
Overview
If you’re looking for something that’s not too fancy and comes with all the essentials, then the Vivosun utility pump would be the perfect one for you.
With a lightweight and portable design, it is ideal for simple day-to-day applications.
The frame of the pump is made of aluminum which means that the body is incredibly light and yet sturdy enough to avoid any wear and tear. It is quite small as well, with a handlebar which makes it very easy to carry around.
It can run on 115 V and has a flow rate of 330 GPH with a max head of 39 feet. The best part about this pump is that it’s really very easy to use.
All you need to do is connect it to the hose, plug the pump into a power source and you’re all set.
The pump head is made of zinc-alloy, which means you can rest assured that the device will last for a long without causing any problems.
The pump can be used to clean aquariums, ponds, lawns, pools, etc. It can also be used to flush out your water heater, which does not have a tank.
Also, the pump is self-priming, so you do not have to worry about air bubbles damaging the insides of the pump.
6. EXTRAUP Electric Water Transfer Pump
- Horse Power: 1/10 HP
- Max Head: 39 feet
- Flow Rate: 330 GPH
- Voltage: 115 V
- Lightweight
- It can be used to remove water from the washing area
- Comes with additional brushes
- There’s no switch on the that be used to turn it On or Off. Plugging it in will power up the pump directly.
Overview
EXTRAUP electric water pump is an easy-to-use, ergonomic, and long-lasting tool that helps you with several things that include but are not limited to cleaning, draining, spraying, etc.
Featuring a horsepower rating of 1/10, the pump offers a maximum flow of 330 GPH instead of a maximum lift of 39 feet. It works on a power supply of 115 V.
It can also clear up water down to 1/8th of an inch with the water suction attachment included with the package.
You will also get a 6’ hose and a water suction strainer along with an impeller replacement kit.
Plus, the pump is self-priming, so you don’t need to worry about air bubbles messing up the system.
The pump allows you to work with basements with flooding issues or transfer water from one pool to another, along with helping you drain waterbeds, clogged sinks, and aquariums.
7. FIXKIT Submersible Pump for Dirty Water
- Horse Power: 1.02 HP
- Max Head: 26.2 feet
- Flow Rate: 3432 GPH
- Voltage: 115 V
- It can be used for large water cleaning activities
- Submersible down to 23 feet
- Multi-outlet
- Cannot transfer liquids with temperatures above 95°F
Overview
If you’re looking for a heavy-duty pump that has a reasonable price value and offers durability, then the FIXKIT Portable electric pump is probably the one for you.
With a sleek and smooth design, the pump is both beautiful and powerful at the same time.
Mainly used for cleaning purposes and draining out dirty water, the FIXKIT submersible water pump, as the name suggests, can be submerged down to a maximum depth of 23 feet.
It runs on a power of 115 V and has a horsepower of 1.02 with a maximum flow rate of up to 3432 GPH. Plus, the maximum head is around 26 feet.
Featuring a movable handle, the pump is made out of sturdy stainless steel and has multiple outlets with a float switch that allows for automatic adjustment of water height.
Additionally, you can use the pump with hoses that are 1-1/4 inches and 1-1/2 inches in size. With a multi-outlet facility, you can choose an outlet that offers you your desired flow rate.
This powerful pipe can not only be used for household applications such as draining out dirty water from ponds and pools but can also be used on farms, for liquid recycling, and for various other large water removal purposes.
There’s one thing to be careful about, though. You cannot use the pump to transfer flammable liquids or toilet/mud sewage.
And the temperature of the liquid being transferred cannot exceed 35°C. Otherwise, the pump will automatically turn itself off.
8. SHYLIYU Automatic Shower Booster Pump
- Power: 120 W
- Max Head: 49 feet
- Flow Rate: 7 GPM
- Voltage: 115 V
- Offers high pressure
- Easy to install
- Ergonomic design
- Makes noise while operating
Overview
Having problems with low pressure in your house’s water supply? Can’t get enough water out of the hose to properly water your garden or fill your pond?
If these are the questions that are worrying you, then SHYLIYU’s pressure pump is your answer.
With a maximum head of 49 feet and a flow rate of 7 GPM, the SHYLIYU pressure pump is an excellent facility that features a maximum pressure of 21.7 psi at a speed of 3460 revolutions per minute.
It runs on 115 V and has a power rating of 120 W. The outlet has a size of 1 inch, and the diameter of the water flow is 3/4th of an inch.
This pump is specifically for those who want to boost the low-pressure water taps, faucets, and other similar types of water supply outlets.
It is effortless to install all you need to do is connect the pump to the pipe without calling an expert to do it for you.
The pump has a housing made of aluminum which makes it quite lightweight.
The impeller is made of brass, and the wire of the motor is copper, whereas the shaft is made of stainless steel.
So, as you can see, this pump is highly durable and resistant to any corrosion.
9. MERRCO Submersible Sump Pump Water Pump
- Power: 750 W
- Max Head: 26.2 feet
- Flow Rate: 3302 GPH
- Voltage: 110 V
- High flow rate
- Auto Float Switch
- Anti-corrosive body
- Self-priming can be a bit slow
Overview
The MERRCO Submersible Pump is an outstanding self-priming water pump that offers excellent water transfer. Its high power makes it the ideal candidate for many jobs requiring long hours and including large areas.
With a horsepower of 1, the MERRCO submersible pump has a maximum lift of 16 feet with a flow of 3302 GPH! With this, it can almost do any task that is associated with drainage.
Doesn’t matter how big the area is; this pump can do it in no time.
Also, it runs on just 110 V. The pump is basically made out of premium plastic, which means you don’t have to worry about corrosion or rust.
It also means that the pump’s body wouldn’t be affected by any acid or alkaline solutions.
It also comes equipped with an auto-float switch which turns the pump off whenever the water level is below 4.7 inches. Once the level is above this, the switch will turn the pump on.
The pump can be used to drain out flooded areas, clean out your swimming pool, and can also be used for ponds, fountains, even waterfalls!
10. FLOWPAC Long Distance Water Pump
- Horse Power: ½ HP
- Max Head: 100 feet
- Flow Rate: 1500 GPH
- Voltage: 115 V
- The Head of the pump is quite high
- Durable
- High suction lift
- Makes noise
Overview
FLOWPAC’S high pressure water pump is truly a long-distance water pump in every sense of the word. Its high pressure and outstanding suction capabilities make it a must-buy for anyone who wants a high-quality water pumping system at their home.
Featuring a maximum flow rate of 1500 GPH at a voltage of 115 V, the maximum head of this pump is actually 100 feet!
Now that’s a lot. All of this is at a power rating of ½ HP.
The pressure that the pump offers at discharge is equal to 50 psi and can give a suction lift of 20 feet. With these specs, you can be assured that the pump can do any job that involves long distances.
To be more specific, the pump can be used to drain water out of aquariums, sinks that might have been clogged, flooded basements, pools, etc.
It is made out of cast iron steel, making it one of the strongest water pumps. And to prevent the iron from getting damaged, the pump’s surface is coated with plastic.
Buying Guide
Water pumping setups are quite an intricate thing to comprehend. With so many nuances in each type of pump, it just gets incredibly overwhelming to find out the perfect pump for your needs.
Due to this, the following guide will help in explaining the many things that go into making a pump. More importantly, it will tell you what you need to look at before buying one.
There are only a few essential factors to consider; apart from those, it’s just the mechanics of the pump. Of course, it would benefit from knowing that, but it won’t help you figure out your purchase.
With this, let’s dive into this arcane world of water pumps.
Head and Flow Rate
One of the most important things with a long-distance water pump is its head and flow rate. Quite simply, the water pump head measures the distance the water can travel in a completely vertical direction.
So a water pump that has a maximum head of 29 feet, for instance, would mean that the pump can push water upwards up to 29 feet when positioned in a completely vertical direction.
This contrasts with the flow rate, measured either in gallons per hour (GPH) or gallons per minute (GPM). The maximum flow rate basically tells how much a water pump can discharge in a particular amount of time when in a completely horizontal position.
So essentially, we won’t be looking at the head in a completely horizontal position but rather at the flow rate. The higher the maximum flow rate of a pump, the more water will come out of the pump.
The relationship between head and flow rate is inverse. That is, as you move the pump toward a vertical position, the flow keeps decreasing while the head keeps increasing until it reaches its maximum at a completely vertical position.
If you plot out the head against the flow rate, you will get a somewhat concave shaped graph. You should check this chart by asking your manufacturer. This will give you an idea of whether the pump meets your requirements.
You will also need to figure out how you will be placing the pump and how long a distance you want the pump to transfer water from your main water supply. This will then tell you the appropriate amount of head and flow rate that you would need.
Suction Lift
The suction lift measures the distance the water can be sucked upwards by the pump. So, for example, let’s say your water source is underground, say 7 feet below ground level. And your pump is placed on the ground.
This means the suction lift of the pump should at least be 7 feet so that it can lift the water from beneath the ground. In this case, the suction lift should be 7 feet.
Again, you should check where your water supply source is. If a water tank is high above the pump being below, the suction lift won’t play much of a role. But it is still good to get a pump that has sufficient suction lift.
Impeller
An impeller is what the pump uses to push the water upward. The impeller is placed within the motor and rotates continuously to move the water out of the discharge outlet with pressure.
It has a circular shape. The point to consider here is to check the diameter of the impeller and whether it is made out of durable material. Usually, the larger the diameter of the impeller, the more efficient the water outflow.
Also, if you want a different Head vs. Flow Rate configuration, you can get an impeller of a different diameter than the one already installed. You will need to check with your manufacturer what diameter would satisfy the head/flow rate you want.
NPSH
NPSH or Net Positive Suction Head is simply the minimum amount of pressure that the liquid being pulled in by the pump should be at. If the liquid pressure falls below the NPSH value, then it will start to boil.
Basically, when the water is being sucked upwards toward the impeller, the pressure is quite low at this point. If, during this, the pressure of liquid somehow falls below NPSH, cavitation would begin.
Cavitation is simply the process of a liquid boiling up and forming bubbles within the pump. These bubbles can damage the insides of the pump. And so, you should make sure that the pump you are getting has an NPSH that can help in transferring the liquid you want to transfer.
That is, you might want to transfer liquids other than water. Such liquids may start boiling up at a certain amount of pressure. So you should make sure that you get a pump that allows for an NPSH that can prevent this from happening.
Horsepower and Efficiency
Horsepower is simply the power required to transfer water at 100% efficiency. Efficiency is simply the percentage value of energy going into the pump relative to the energy coming out of the pump.
That is, we give electrical energy to move the pump. This energy is finally transferred to potential energy at the impellers, which causes the water to gush out.
So if we say that the pump is operating at 100% efficiency, then we mean that all the electrical energy has been transformed to potential energy to discharge the water.
However, this is not the case. Some energy is lost within the motor to overcome factors like friction. So generally, water pumps do not operate at 100% efficiency.
Now, horsepower is basically the amount of power that the pump needs to transfer water from one point to another.
The interesting part is that the amount of horsepower that a pump needs depends on the flow rate and head of the pump. Usually, the higher the flow rate, the more horsepower that is required.
You can actually use some formulas to check how much horsepower a pump should have, given the head and flow rate that you want. It is a good way of checking the quality of the pump you’re buying.
If the horsepower of the pump is more than what your required head/flow rate dictates, you can have higher efficiency. This is good because then you won’t have problems with low-pressure water discharge.
You can also get an impeller with a larger diameter to increase efficiency. Check with your manufacturer if this is possible for the brand that you are buying.
Voltage
This is simply the voltage required for the water pump to run. Most water pumps run on 115 V. Make sure that the power supply has the right voltage requirements.
A higher than required voltage may damage the pump, and a lower voltage will prevent the pump from operating.
Final Verdict
So now you know quite a lot about water pumps. They are indeed a great technology. But if misused, they won’t be of much help.
Reading the guide above would help you understand the workings of a water pump and what you need to look for. Of course, you can always do your own research to learn more about the engineering stuff.
All in all, technicalities aside, it is important that you know what is meant by the head, flow rate, suction lift, required voltage, and horsepower. You can enquire about upgrading to a larger impeller as well if the default settings aren’t suitable.
Related Posts:
You may also love to read these my reviews and the buying guides…
People Also Asked
Here are a few questions answered to help you more on this topic;
What is the best Long Distance Water Pumping Setup?
Here is my list of the Best Thermostat for Heat Pump with Auxiliary Heat in 2022;
- DC HOUSE Industrial Water Pressure Pump
- TecHome Water Portable Utility Pump
- MEDAS Portable Utility Water Transfer Pump
- Trupow Mini Portable Electric Utility Sump Transfer
- VIVOSUN Long Distance Water Transfer Pump
- EXTRAUP Electric Water Transfer Pump
- FIXKIT Submersible Pump for Dirty Water
- SHYLIYU Automatic Shower Booster Pump
- MERRCO Submersible Sump Pump Water Pump
- FLOWPAC Long Distance Water Pump
What is a shaft?
The shaft of a pump is what attaches the rotor to the impeller. When the rotor revolves, so does the shaft, which eventually rotates the impeller. This rotation causes the impeller to discharge water.
What is RPM?
RPM stands for Revolutions per minute. It is used to measure the rotational speed of the impeller. The higher the RPM, the more maintenance a pump requires. So it’s advisable to choose a lower RPM pump.
What does self-priming mean?
Self-priming is a feature where water pumps automatically remove air from within. Pumps need to remove this air before pumping water. Otherwise, air bubbles can form, which can damage the pump.
- Deck Awnings with Mosquito Netting - December 10, 2022
- Retractable Side Awning for Patio - December 10, 2022
- Best Soldering Iron for Automotive Wiring - December 2, 2021