Best Drill Bits for Wood Working

Drilling through the wood is easy?

The answer is yes. as wood is normally a soft material. But it may become messy if you choose the wrong drill bit.

We will have a walkthrough of the best available drill bit for woodwork also, the technical specifications. The FAQ will be done at the end to make sure all the related questions should be answered.

Are you looking for cheap Drill bits?

We will also see pricing comparisons and packages available.


Here are my recommended products picked out through amazon you would be interested in depending on your budget…

IRWIN Tools SPEEDBOR Max Wood Drilling Bits, 6-Inch length,...
IRWIN Tools SPEEDBOR Max Wood Drilling Bits, 6-Inch length,...
Full screw-point tip allows bit to self-feed for ease of drilling; Tapered tri-flute design for faster chip ejection and less binding.
Best Value
IRWIN Tools SPEEDBOR Blue Groove Pro Spade Bit Set with...
IRWIN Tools SPEEDBOR Blue Groove Pro Spade Bit Set with...
Drill bits feature a Blue-Groove point and cutting edge for fast chip removal; Spade bits use double-cutting spurs that scribe the outside of the hole, reducing breakout
IRWIN SPEEDBOR Drill Bit Set, Auger, 6-Piece (3041006)
IRWIN SPEEDBOR Drill Bit Set, Auger, 6-Piece (3041006)
The Fastest Speebor spade bit ever; Tri-Flute design for faster chip ejection; Cutting spurs have 3 cutting edges for added durability

Which Drill Bit for Wood | Top Rated

You always need to have the proper type of bit for each job. Just as you wouldn’t want to use a masonry drill bit to drill into metal, you shouldn’t use tile drill bits to drill into wood.

When you use the proper wood drill bit, it will drill with ease and provide a precise and clean hole. It is so important to select an appropriate drill bit for the wood you are drilling.

1. IRWIN Tools Blue Spade Bit Set

Good sharp wood drill bits are powerful, quick, and easily drill through even the hardest pieces of wood.

Let us see the top-rated list of Drill bits around. This Spade bit has an extra blue groove that helps fast chip removal, adding more efficiency and concentration to the drill bit. IRWIN Tools SPEEDBOR Blue Groove Pro Spade Bit Set comes with Case & 8-Pieces. It has a large shank that helps for more durability of the drill bit.

The IRWIN SPEEDBOR spade drill bit delivers very smooth ‘holes.’ This smoothness reduces breakouts and countersink.

>>>Check the Latest Spade Drill Bit Amazon Prices >>>

What We Like!
  • Grooved Hex Shank gives a strong grip.
  • Smooth ‘hole ‘ without breakouts
  • Chipping is handled efficiently
  • Durable Case
Things to Consider!
  • Blue paint fades away quickly.

What’s Our Take…..

When you need to deal with delicate wood stuff and cannot afford to mess around the working area, these drill bits are best as the long shank gives the grip with Hex shape. It is good for a good value for your money. The case is made of durable molded ABS resin & tough.

2. IRWIN Tools SPEEDBOR Max Wood Drilling Bits

This variation comes with the self-feeding screw tip, sharp and radical edges, and two spurs. This variation has a double flute starting from the sharp cutting edges up to the shank that provides extra grip and helps drill wood with ease.

This drill bit set comes with three cutting spurs that give a faster, cleaner hole, reduce breakouts, and long life.

>>>Check the Self Feed Drill Bit Amazon Prices >>>

What We Like!
  • Screw-point tip gives a self-feed for ease of drilling
  • The geometry of the drill bit helps for smooth ejection.
  • Easily fixed and replaced in the drill machine.
Things to Consider!
  • Only 10 sizes are available.

What’s Our Take…..

If you are looking for fast work, then this one is best for you. You have a big project where time is the constraint, and you also know exactly the drill bit sizes are as per your requirements. It will save you time, and flute design increases productivity as it let the dust remove with ease.

3. Ver mont American 14561 WoodEater Wood Boring Bits

These are some of the cheapest drill bits for woodworks. It can work fast and is specially designed for repetitive boring.

It can cut 3x faster than the others as it is quite longer than standard spade drill bits.

These bits pull themselves through the wood without any effort.

These can be sharpened easily and can be used for a longer run.

>>>Check the Wood Eater Drill Bit Amazon Prices >>>

What We Like!
  • Best and cheap bits for house jobs.
  • No need for spade bits anymore
  • Tough, reliable, and quality bits.
Things to Consider!
  • Aesthetics are not that great

What’s Our Take…..

We really like it as it got many positive reviews as well at Amazon. It is quite cheaper or may the cheapest one in our reviewed lot here. It is fast and heavy-duty stuff.

4. Auger Drill Bits | IRWIN SPEEDBOR

The auger bit is another wood bit with a spiral shaft and a wide cutting sharp edge with a tapered point for an exact fit.

Unlike twist bits, auger bits are perfect for drilling deep and straight holes into wood. As this bit drills, wood particles are pulled out of the hole to not build up inside the hole. These drill bits drill very quickly and leave a clean hole.

>>>Check the Auger Drill Bit Amazon Prices >>>

What We Like!
  • It is the Fastest Speebor spade drill bit in the market.
  • Chip ejection is easy due to the tri-Flute design.
  • The screw tip gives a self-feed
  • Hex shank (grooved) eliminates slippage
Things to Consider!
  • A bit costlier than standard spade bits

What’s Our Take…..

This new innovative geometry gives a fast, clean, and number of holes than other others. The brand is also good. You will get a good tough case that can no longer the best value for your money overall.

5. Ship Auger | Tubed Bit

Ship Auger is the best for longer Holes like its length is 17″. Nice flute design helps to go deeper as it removes the chipping and keeps the drill bit cool.

You need it when you need any special task where a long drill is required, as in many woodworks outside; we need it. Normally, it is used at landscape, plantation, and drilling in heavy wood blocks or planks.

>>>Check the Ship Auger Drill Bit Amazon Prices >>>

What We Like!
  • Hollow center flutes clear chips quickly out of holes
  • These Drill Bits can be resharpened easily
  • The screw tip gives a self-feed
  • Hex shank (grooved) eliminates slippage
Things to Consider!
  • Extra cooling is required during heavy jobs.
  • Not OK for house jobs.
  • Not easy to handle for a newbie.

What’s Our Take…..

A long drill bit can be used where the nail is already there in the wood. You can deal with this kind of job easily without damaging the area. The screw point is Medium-fast and best for general woodboring. All the bit is heat-treated, which makes it more tough and reliable.

6. Irwin 39108 1/2-Inch by 18-Inch Installer Twist Drill Bit

The flute head is something extraordinary in these drill bits. This makes the wood drilling smoother, cleaner, and fast. This can easily handle where wiring applications are encountered.

This drill is longer than the Ship Auger (17″), but this Installed is 18″. A long shank to help proper handling and grip during operation. It has a diameter of 1/2″ that adds more strength.

>>>Check the Installer Drill Bit Amazon Prices >>>

What We Like!
  • More length and more diameter with a long shank (18″, 1/2″, .370″)
  • It gives quick chip removal without clogging & binding.
  • Special finishing for flute
Things to Consider!
  • This product is manufactured in China

What’s Our Take…..

Although the product is made in China still is one of the best qualities globally, it makes a much deeper hole. The price is quite nominal, and if you are looking for deeper holes, you can easily grab a piece.

7. PORTER-CABLE Forstner Bit Set

These are quite innovative wood drill bits with oper tooth design. This design helps to give a better finish than other drill bits in the market. The brand is quite old, and hence quality is guaranteed.

This drill bit set a bit expensive but included several common bit sizes from 1/4″ to 2″.
These bits give a very smooth finish.

>>>Check the Forstner Drill Bit Amazon Prices >>>

What We Like!
  • All common sizes are available.
  • Cleaner finish than others
    A good looking tough case included
Things to Consider!
  • A bit expensive

What’s Our Take…..

We have read some reviews where customers got the poor quality and china made stuff. But if you buy through any reliable resource, you can get the best experience while wood drilling. This set is going to be a lifetime in your toolbox for sure.

8. COMOWARE Titanium Twist Drill Bit Set

These are the multipurpose drill bits. Titanium coating gives extra life, and a gold shining look adds its own value. High-Speed steel coated with titanium is something extraordinary when it comes to drilling bit metallurgy.

With titanium coating, you can save time to sharpen the bid again and again. High quality cutting teeth make sure the smooth, clean hole and precise countersinking.

>>>Check the Comoware Titanium Drill Bit Amazon Prices >>>

What We Like!
  • Can cut through wood as well as sheet metal & plastic
  • hex shank helps for a quick change and proper grip
  • 2 Fluet forms help for chipping action
  • HSS alloy gives it high strength and toughness
Things to Consider!
  • Proper Casing is not available

What’s Our Take…..

A multipurpose drill bit set. This is a must to have as you can use it for other purposes like sheet metal, Aluminum and plastics as well. This is the reason we ranked it higher than others.

Way Forward

We have compiled this list based on general as well as on industrial use. You need to understand your project in terms of cost and time, and then you can easily decide which one to take.

Still indecisive about what you are looking for. See the below point.

Drill bits are not confined When it comes to woodworks. We need various drill bits dedicated to specific drill work on woods like boring, cutting, chipping for long and thick woods.

We will have a technical review of the major types here.

Wood Boring Drill Bits

Boring Wood Was Never So Quick And Easy With Wood Boring Drill Bits

Wood boring drill bits are such equipment that is used to bore the wood and related material. They come in handy when one wants to drill deep and wide bores into wood.

…In a Hurry?

Make sure to go through all types and choose the best one for your project.

As one knows that the toughest part while undergoing construction work is wood-boring, one should always use such bits that can bore wood efficiently. One has to use a perfect bore bit with all the required features used to bore the wood like sharpness, durability, length, simplicity, and affordability, and there are such drill bits available in the market.

These bore bits have many prominent features like they are equipped with a good sharp body with required variations on their outer part like twists, turns, and sharp edges.

Wood boring drill bits are accurate in their work. They fit perfectly in the drill and help one craft out flat bottom holes that are accurate in width, i.e., it comes in handy when cutting or boring precise diameter holes into the wood. A wood bore bit is an ideal bit for stock removal and eliminates rough and haphazard carving.

Bore bits thus assure their users a clean and sleek look every time they use it. Some of the most important features are made out of solid quality steel, i.e., they are durable, affordable, and have all the required twists, bends, and sharp edges that help to craft out flat bottom holes for wood boring.

As far as the length of wood boring drill bits is concerned, they have a considerable amount of length required for the job it is meant for. Usually, a wood bore bit is 0.25 to 4 inches long, which helps it do the work faster and helps its users get a better grip.

Wood boring drill bits are available in many sizes and many shapes, i.e., with variations so that one will not fall short of the bits and can fit every need of one’s construction work.

Some of the wood-boring drill bits are boring auger bits, bore spade bits, and bore twist bits. Bore twists, auger, and spade bits are the variations used to make wood-boring efficient, and clean. In all these variations, wood bore bits are modified, looking like auger, twists, and spade bits. While an auger bore bit has a sharp shaft, a twist bore bit has sharp twists and turns used to bore wood.

These kinds of wood boring drill bits are effective ways to bore wood efficiently and cleanly without flaws. All in all, one has to agree that bits used to drill the wood are the most efficient when it comes to crafting out flat bottom holes into the wood. They are tough, durable, and resistant.

One of them’s important features is that they have a unique tendency to absorb shocks and power fluctuations, which increases its efficiency.

Wood Auger Drill Bits

Drill Wide And Deep Holes Into The Wood With Efficient Wood Auger Drill Bits

Price at Amazon!

IRWIN Drill Bit Set for Wood

Prominent Features
  • Tri flute for faster chip removal
  • Screw tipped and can feed itself
  • An innovative grooved hex shank reduces slipping fears
  • It supports quick change

Drilling through holes is a challenging task that can be eased by using a high-efficiency wood bit, and one such drill bit is a wood auger drill bit. Auger bits are the bits used to drill and make deep and large holes in wood logs. No matter how thick the log is, an auger bit can easily drill holes in the wood, as if it was drilling through butter.

Thus, wood auger drill bits are the best and most effective ways to make deep and large wood holes. It happens all the time in one’s construction work that one needs to drill through thick logs of wood wherein an auger bit can prove handy and helpful. It is used to make large and deep holes in the wood to measure up to 35mm. They are the most effective to drill with because of their layout.

Wood auger drill bits have a spiral shaft with a deep cut coupled with a sharp edge and a central point for exact and correct positioning.

Because of its ability to position itself accurately, wood is drilled through with ease, and clean holes with finishing can be crafted out. The spiral shaft with a deep cut and the sharp cutting edge adds to its outlay and drills through wood with ease and speed.

The drilling principles used in wood auger drill bits are not much different, but a long spiral flute makes it a bit more powerful than ever.

Thus, all in all, an auger bit is the answer if one wants to make deep and large holes in the wood. These bits are widely used in every field, viz. construction, household, and others, which work with wood like a carpenter or a contractor of furniture making.

One variation in auger bits is the solid center auger bit that is not much different from the normal bit. The only variation is that one of the cutting edges has a vestigial flute that supports and extends up to 12mm of the shank, whereas the other edge is the same and does waste removal properly.

Wood auger drill bits thus have enough variations to fit every need of drilling-related work. This solid center auger bit is an effective variation in auger bit since it has a feature of waste removal.

All in all, one can use wood auger drill bits to make holes that are deep and large in size, and they have many features like cost efficiency, power, quality, and endurance coupled with durability.

If handled properly, an auger bit can result in saving time and money because they can be used time and time again, so you don’t have to buy them over and over.

Also Read: Best Drill Bit Reviews

Long Wood Drill Bits

Deep And Clean Into The Toughest Logs Of Wood With Long Wood Drill Bits

Price at Amazon!

Neiko 10047A 12″ Extra Long Drill Bit Set

Prominent Features
  • HSS material for high strength & durability
  • Extra-long 12″ still hard enough to bend during operation
  • Best to deal with hard areas where Jobber cannot go
  • You can drill through metal, wood, plastic, fiber, etc.

Drill bits are those instruments that are attached to drills while drilling. Drilling wood can be really a hard task that can tier you up, but with the use of long wood drill bits, this can be done with utmost ease and comfort. Usually speaking, a long bit is considerably wide and long to drill holes of various sizes into the wood.

Using a perfect bit is a prominent nature if you are about to drill wood and its components. Firstly, one must assess their need and the size of the hole they require and then use the appropriate long wood drill bits to easily bypass the wood. These bits are otherwise termed as long bits to drill wood because they are considerably long, ranging between 0.8 to 15mm, which helps one drill holes of reasonable depth and diameter in the log.

As one is aware of the various types of wood bits viz. auger, flat, twist, and expansive bits, they should take reasonable care to choose the longest bit of all if the hole required to be drilled deep and wide. The most preferred choice in long wood drill bits is twist bits, which are considerably longer and can measure up to 12mm in length.

The prominent advantage of choosing long twist bits is that they have sharp edges and a high-frequency cutter that can be used with a power drill and can make your work easy and quick. A long bit may also be wide, as concerned with the diameter of the wood. If one’s main concern is to drill a wide and not-so-deep hole, an adjustable drill bit for wood may be used.

The adjustable long wood drill bits are considerably wide and can make wide holes. This bit is high as far as the diameter is concerned, as it measures from 3 quarters to 3 inches in diameter and thus is effective to make wide holes in wood.

Thus, long wood drill bits are important tools to make wide and deep holes into the wood. Another variation in wood bits is the hole saw drill bit that drills the wood easily and can make deep and wide holes. It drills a considerable amount of holes in wood that are rich in diameter and depth.

Hole saw bits can measure anywhere between 0.5 to 6mm in diameter, which comes in handy in drilling wide holes in tough wood logs. All in all, long wood drill bits are powerful, durable, sharp, and also shock resistant. A long auger drill bit can also be used to make deep holes in the wood.

It is considerably longer in size and can make deep holes that are considerably deep and clean. A spade long drill bit can be used to craft out wide holes, and it measures between 0.25 to1.5 in diameter.

Large Wood Drill Bits

Drill Deep, Wide And Quick With Large Wood Drill Bits To Ease Your Drilling Work

Price at Amazon!

Freud Precision Shear Serrated Edge Forstner Drill Bit

Prominent Features
  • Ultra shart Spurr for precise drilling
  • Sharp edges give a clean result
  • Enough space for bulky chip removal
  • Quick change shank design

Large wood drill bits are those drill bits attached to the drills, are predominantly large in both width and height, and are used to make various kinds of holes that vary in depth and width into the wood.

A wood bit is considered large when it has enough diameter and is pretty much long enough to penetrate the woods’ hardest. Many uses of wood bits in constructing furniture or any other related work that requires drilling holes in wood to a deeper extent. All in all, these wood bits are prominent bits that are powerful and a quick and speedy way to get the wood-related work done.

Large wood bits are of many types, like larger augers, large twists, and large saws, and so on. The most prominent feature of large bits is they can really drill through any wood log no matter how tough it is. Some of the prominent variations in large wood drill bits are:


These large bits’ structure comprises high-quality steel that makes them extra tough and resistant to take up any tough job. The weight is usually not a thing to worry about because the tougher the bit is, the less it weighs. Thus all of the wood bits are large and lightweight. The large wood drill bits are long and wide for the easy drilling of wide and deep holes. A large twist bit has sharp twists that help the bit penetrate. Thus, there is a bit available for every use and need.


Large wood drill bits are rich in features. They have got all the primary features that a drill bit should have. Some of the features that they have are; they are comparatively long and wide as far as length and diameter are concerned for effectively drilling large holes, they are tough, durable, resistant, and can absorb shock; these wood bits are cost-effective, are lightweight, and can handle the pressure. Thus, large wood bits have the entire prominent feature that a modernized tool should have.


As far as the length and diameter of large wood drill bits are concerned, they have relatively far better lengths and are extensively wide. One can get a large wood bit starting from 12mm to 20mm and beyond in width and length. All wood drill bits are also made in long versions apart from normal versions. A hole saw bit is the only bit that is not too wide compared to other large bits; a hole saw maybe only 6mm wide but is still very effective in drilling wide holes.

Tapered Drill Bits

Price at Amazon!

Snappy Tools Quick-Change Countersink Drill Bit Set

Prominent Features
  • These Snappy tools are proudly made in the USA and affordable
  • Equally beneficial for DIYer and trade professional
  • Shank design supports the power tool
  • Reliable & durable drill bits

This bit is used for different purposes such as woodworking, metal fabrication. It is used for making holes in the wood. It is a bit that is connected to the drill. It is narrow to the end. To create a pilot hole for woodscrew is used. Tapered drill bits have the same shape and design, but there is a variation in a bit the length.

There are various types of taper drill bits, such as the taper point hex shank drill bit, regular fuller, extended fuller taper point drill bit, and Long Length Taper Point Drills. The same diameter and appropriate size bit are selected for a wood screw. If we want to get maximum pulling power, it depends on the drill’s appropriate depth.

It is not designed for metal, and it is used for wood floors and carpentry. Now I am describing various sizes of taper drill bits. Its connect size is 25, 9; 22, etc. D26-100 mm as its diameter, 6 degrees, 7 degrees, 11 degrees, etc., are its tapered connection. We can get the package of tapered drill bits in wood or plastic box.50000 pc/month is its productivity. Its unit price is meager.
A long length taper point drill is tough to start. Sometimes they need to sharp cut and slowly cut. It is specially used for chair making.

Expandable bits have a central screw point. There are many sites available in the online world describing Taper drill bits. We can get the correct information from online sites. After knowing the information, we can buy a quality taper drill bit by using a credit card online. They will send it to the target place. So anyone can buy it by ordering from home so that they can save time.

It is better to take the branded drill bits as they will be used for a longer time, and also, they will be more efficient.

Way Forward

There is a variety, and innovative bits are available in the market. Therefore, one has to understand that if they want to drill holes that are deep and wide too, only chipping, or just boring.

Read More: Best Drill Bits, Chainsaw Sharpeners, Pressure Washer Nozzles and, Zero Turn Lawn Mower.

History of Wood Drill Bits

Since the beginning of humanity’s rise to civilization, the need to drill holes in wood for constructive purposes has been a never-ending obsession. Developments of this technology have been going on for millennia, and the advances that are seen today are testimony of mans’ need for a bigger, better drilling product.

Stone Drill Bit

The first wood drill bits were most likely made of stone. The sharp end of a rock would be twisted into the wood, boring a rough and large hole. This, of course, led to problems of having a hole that did not match the project, such as a shelter. Then a flake of stone was made to fit on the end of a straight stick, which in turn was spun by using a stick and string bow affair, intriguingly similar to the fire starting method.

Iron Drill Bit

When iron was discovered  and ironworking began to develop, shaper instruments were developed to drill through a wood in a more controlled, specialized action. The screw was not invented yet, but holes could be bored by sharpened iron tips attached to the straight sticks. The drill tips could be forged in any size and could withstand much more work than stone.

When the screw was discovered, meaning the auger-type mathematical design, the wood drill bit was born. The first drill bits used for wood construction were quite large and only came in a small number of sizes. They were manufactured by twisting a heat softened flat bar of iron until the exact screw size was reached, and then the shank was hammer-formed to fit a hand drill.

Hand Drills

Hand drills have been in use as far back as the 1400s and came upon a lull of development until the early 1900s when plastics were beginning to be realized. The hand drill comprised a simple U-shaped rod, the top having a rotatable handle, and the handgrip in the “U” made of wood and made to rotate. This gave the woodworker a fast enough spin for the cutting edge of the wood drill bit to bite into the wood. The screw action of the bit also brought out debris from the hole.

Electric Drills

The first electric drill was invented by an Australian, Arthur James Arnot, in the late 1880s. It was heavy and hard to handle, and most times, a harness had to be worn to use it. Later developments brought the electric drill to what we know and love today.

Drill Bit sizes

Wood drill bits come in a variety of sizes and functions. The standard jobber-type drill bit is seen in hardware stores or anywhere wood drill bits are sold. These drill bits have a shank the same size as the bore, or hole, the bit will drill. The shank is also at a standard length, about 3 1/2 times the size of the bore.

Wood drill bits are sold by Black and Decker, a trusted name in drill bit technology, Milwaukee tool, an American tool company that has been manufacturing wood drill bits for decades, and even Bosch, the German company that started manufacturing higher technology wood bits since the 1880s. Wood drill bits also come in counter-sink versions, enabling the woodworker to sink the heads of a wood screw or nail for a flush fit.


Nowadays, we have all the comfort to choose any required drill bit as per our project. We got many innovative tips, flute sizes, speed, strength, and almost everything in wood drill bits.

FAQ’s about Wood Drill Bits

What are the main types of Drill bits?

When drilling through wood products, you will want to choose the best drill bit to fit your drilling needs. There are several different types of wood drill bits available.

These are the main types but not limited to that are dedicated to wood mainly or can be used efficiently;

  1. Spade Bits
  2. Hole Saws
  3. Step Bits
  4. Auger Bits
  5. Ship Auger Bit
  6. Installer Twist Bits
  7. Forstner Bits
  8. Brad Point Bits
  9. Self-Feed Bit

How can you tell if a drill bit is for Wood?

You can tell by just looking at the tip. Normally, a wood drill bit has a small pointed tip at the end and spurs on each side.

Can we use HSS drill bits for Wood?

Yes, we can use it as we have seen, HSS titanium coated drill bits.

What are wood-boring bits used for?

You can use the Forstner & Hole Saw drill bit for smooth holes in wood.

What types of materials are used for wood-boring bits?

High-speed steel is good to have for medium-speed wood drill bits. You can use tip coating if in your budget.

Read More: Best Drill Bits, Chainsaw Sharpeners, Pressure Washer Nozzles and, Zero Turn Lawn Mower.


Porcelain Drill Bits
Porcelain tiles have taken over the ordinary ceramic tiles. This mainly because porcelain tile sare more good aesthetically….

Porcelain Drill Bits

Best Drill Bits
Whether you are on the job site or puttering around the house, a drill bit set is a necessary component of any working…..

Best Drill Bits

Carbide Drill Bits
Carbide drill bits are some of the most used drilling tools on the market today. These high-strength carbon steel ….

Carbide Drill Bits

Masonry Drill Bits
A drill bit is an equipment that is utilized in creating holes that are generally cylindrical. A drill is a tool that is used….

Masonry Drill Bits

Stee Drill Bits
Drilling through wood and plastic is easy if you choose a proper drill bit type. But drilling through hardened steel….

Steel Drill Bits

Drill Bits Extension
A drill bit extension is a lifesaver when you need to drill through materials that are more than twelve inches thick….

Drill Bit Extension

Glass Drill Bits
Diamond is the only harder material than glass and hence you can only use Diamond Drill Bits for glass!…..

Glass Drill Bits

Wood Drill Bits
Drilling through the wood is easy? The answer is yes. as wood is normally a soft material. But it may…

Wood Drill Bit

David Houghton
Latest posts by David Houghton (see all)

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top