Are you looking for cheap Drill bits?
We will drive you through complete technical & pricing comparisons.
An expensive drill bit means not to be the best one.
Here are my recommended products picked out through amazon you would be interested in depending on your budget…
- What Type of a Drill Bit is Best for You?
- Who Makes the Best Drill Bits?
- Drill Bits Guide
- Common Types of Drill Bit
- Add a Set of Masonry Bits
- Countersink Bits Save You Time
- Diamond Core Bits
- The specialty of Drill Bits
- Choosing the Right Drill Bit Types
- Other Drill Bit Types
- Things to Keep
- Take-Home Point
- Top FAQ’s for Choosing a Drill Bit
If you are in a good reading mode, then you can get the most for your time & money for your project…..
What Type of a Drill Bit is Best for You?
Masonry Drill Bits are used for drilling stone, brick, concrete, or tile. The tip of these bits is made from tungsten carbide. Others may have a silicone alloy bronze for the cutting tip. These drill bits are made in all different lengths and diameters. They should be used with a slow speed rill to avoid overheating.
Wood drill bits are bits that are specifically designed to be used to drill through wood material. You need always to have the proper type of bit for each job. Just as you wouldn’t want to use a masonry drill bit to drill into metal & drywall but you shouldn’t use tile drill bits to drill into wood.
Who Makes the Best Drill Bits?
Make sure to understand the there is no universal drill bit that can perform all the tasks. Like a masonry drill bit cannot work where a Metal Drill bit is required and vice versa.
Normally, we consider a harder material bit for a softer material, but this is also not the case as sometimes we need wood drill bits and so on.
Before we dig in deeper, please read to have more clarity on the nomenclature that helps you understand and choose the best one for your job.
Let us see the top-rated list of Drill bits around.
1. Best Cobalt Drill Bit Set for Professionals | Irwin Tools
Irwin Tools Cobalt drill bits are of high quality and are used by professionals. Cobalt addition makes an iron alloy the increases the strength and toughness of steel and hence the life of a drill bit. It is also called M35 Cobalt Steel.
Key features are;
- Made from cobalt for extreme durability and heat resistance
- Power-efficient as these penetrate immediately.
- It contains 29 – pieces.
- Covers all papular sizes ranging from Sizes 1/16 inch -1/2 inch in 1/64 inch increments & 30° Split Point
- 5% Cobalt For Higher Heat & wear Resistance that helps to increase life span.
- It is a heavy-duty but inexpensive one.
What’s Our Take…..
2. DEWALT Drill Bit Set, Titanium
Dewalt drill bit is a brand with quality. The penetrated bar design allows for easy removal from the drill machine. These Titanium coated drills are 5 times more durable than conventional steel drill bits. Web tapered design is patented by Dwlat that helps to increase strength. All commonly used sizes are there (1/16″ to 1/2″ bit). Overall it is user-friendly with the most popular drill bits.
A burr-free hole you will find at the end.
Key features are;
- An accessory storage system helps to have optimized storage space.
- Patented bit-bar design, and you cannot get on other brands.
- A clip latch is there to have a secure closing.
- These Titanium coated Dewalt drill bits are the best for common metals, wood, and plastics.
What’s Our Take…..
3. Drill America M35 Cobalt Drill Bit Kit
This drill America does not mean that it is made in America. It is being made globally. These are of Jobbar length means these are designed for deep holes. This specific kit has a gold oxide finish. It produces smaller chips so that wear is the less and clean result you will get without breaking issues.
The gold oxide finish acts as efficient lubrication. This is heavy-duty stuff at a meager cost.
A 135-degree angle tip means that it will penetrate and do the job quickly. No wobbling, wandering, walking, or burr there during the job. This comes in a plastic case, and you can easily identify the required drill size required for your job.
Key features are;
- There is 5% cobalt in m35 steel alloy.
- Drilling for tough materials like stainless steel, Inconel, and titanium.
- This is rust Resistant
- Water & shatterproof round case
What’s Our Take…..
4. Craftsman Professional Cobalt Drill Bit Set
Craftsman provides you the quality you want. This Craftsman 9-64085 Professional Cobalt Drill Bit Set is designed for heavy-duty jobs. The cheapest around but very reliable. Craftsman team has a very professional approach when it comes to drilling bits. This kit is simple, but the craftsman also offers a coating of different stuff to make it more effective at an extra cost.
Key Features are;
- A good size range 1/16″ to 3/8″
- A nice looking plaster case
- Heavy-duty drill bits
- Split point geometry that eliminates walking or wobbling
- These are best for drill press machines.
What’s Our Take…..
5. Titanium Drill Bit Set for Metal – 230pc Kit
Titanium coatings are used to reduce friction and heat. This helps fast cutting, and a 135-degree split points angle helps to do the job hassle-free. Titanium coating on high-speed steel is just like a cherry on the top. These are 230 pieces and hence no worries for any size. Multiple bits of the same sizes, especially for smaller sizes, help no to run out of bits during a long day job.
Make sure these bits are not usable for concrete or masonry jobs. These work well for metals, plastics, and fiberglass.
Key Features are;
- Many sizes of drill bits 1/16″-1/2″
- Ideal for metals, wood & plastics.
- Long life and durable due to titanium coating
- Organized in a tray with printed sizes
- Heavy duty case included
What’s Our Take…..
6. Makita B-65399 Impact Gold Kit
Makita hex shank drill bits are designed for clean & accurate drilling holes in metals, wood, and plastics. A hard coating of Titanium Nitride makes it more efficient and normally is 2.5 X faster than that of not coated high-speed steel drills. A better geometry helps to avoid walking during the operation. These are impact-resistant and can bear any small shock as not that brittle. Although the Hex impact divers are sold separately but are worthy of having in your toolbox.
These are ideally used for ferrous metals, non-ferrous metals, wood, plastic, cast iron & even stainless steel – What is left 🙂
Key Features are;
- Hard coating of Titanium nitride (TiN) coating lasts 2.5 times longer than non coated HSS bits
- 135-degree split point geometry reduces “walking.”
- Hex impact drivers make it impact rated for use in 1/4″
- Best use for metals, cast iron, stainless steel, wood, and plastic
What’s Our Take…..
7. Bosch 8 Piece Glass and Tile Bit Set
If you are just a seasonal used and want to use drill bits for your house jobs or an industry professional, this kit covers everything. I call it a Universal Drill Bit. I put it on the number one slot as Bosch gives all the instructions to use and whatever is mentioned is always there even more.
These drill bits provide very precise, accurate, and clean drill holes without any mess. High-quality carbide makes its life longer than other noncoated HSS drill bits. Design is quite innovative, as you see in the image.
Key Features are;
- Can be used for many purposes
- The coating increases life and can be used for a longer time.
- No wandering during operation
- Superior grip due to better shank design even for 5/16 size bits.
What’s Our Take…..
Could not get What You’re Looking For? Read these suggestions, please!
Drill Bits Guide
Always keep in mind three things while choosing a drill bit;
Drill Bit Material
The main materials are Cobalt Steel and Carbide;
Carbon added to iron during melting operation makes its steel. There are certain conditions that carbon should be less than 2%. This percentage of carbon decides if it is low carbon steel, like less than 0.8%, or high carbon steel that is 0.8%-2%. The same Cobalt is added to enhance its functionality. These are factors that decide if it high-speed steel or low-speed steel.
- Soft – Low-carbon Steel: The most inexpensive drill bits of the lot. Frequent sharpening is required. Best for wood. It has a concise life span.
- High-Carbon Steel: It is just an upgraded version of low carbon steel. Here, hardening and tempering techniques are applied to get more reliable results and slightly increase the life span at a minimal cost.
- Tungsten carbide: Very expensive, but premium quality drill bits are of this carbide. The addition of carbide makes the material harder but brittle as well. This is best for the hardest materials. It cannot be used for hand drills. It is very brittle and cannot be used for hand drills due to safety issues.
- HSCO – High-Speed Cobalt: Introduction of cobalt in steel increases its strength and sustainability at higher temperatures. This helps to drill through hard material as well as stainless steel.
A drill bit has a very complex structure. Though it seems simple, it is not!
Drill Bit Length
Shorter the drill bit more control on accuracy and precision on the job. That’s why try to choose the shortest possible drill bit whatever work you are going to perform.
Following all the length factors you need to keep in mind;
- Stub – This term is used for shorter drill bits
- Jobber – This term is used for longer drill bits
Drill Tip Angle
118° is a Standard: The most common drill bit. An angle is for Jobber (long drill bits). This is used for mild steel, Aluminum, and soft materials. A low-speed drill bit.
135° Self-Centering: This is used for hard and tougher material. These are high-speed drill bits.
Moreover, Helix Angle, flute, lip, shank angle, etc., you need to consider.
30° Standard: This is the most commonly used angle for a drill bit.
Parabolic Design: This is used for wood, masonry, plastic, aluminum, and softer materials to drill as it will remove chips by itself.
Considering these factors will help you better save you time and money and safety concerns.
Drill Point Coating
- Black Oxide: Increases chipping and reduces friction. Not good for Aluminum or non-ferrous materials to drill on.
- Bright Oxide: Increases chipping and reduces friction. The best for plastic, wood, and non-ferrous materials to drill on.
- Titanium Nitride –TiN: It helps for a speedy job and is better than uncoated drill bits. Wear resistance increases the tools of life.
- Titanium Carbonitride – TiCN: This one is the best in the lot as it can do great work at stainless steel, cast iron, and aluminum well. Wear-resistant and can handle nickel & cobalt-based alloys. Not good for aluminum, though. It is of shiny gold color.
- Zirconium Nitride: A golden color and can drill through tough materials. Craftsman brand uses it.
- Diamond Powder Coating: Diamond is the hardest material on earth. Its coating does wonder. Diamond powder is coating at the tip of a drill bit. Costly, of course.
This is not limited here as most of the companies will provide you some custom materials as per your needs, like Titanium Aluminum Nitride (TiAlN), and these are more good than Titanium Nitride (TiN) & Titanium Carbon Nitride (TiCN).
Factors depend on your application and the budget.
Common Sizes of Drill Bits
Make sure to get a drill bit set with a maximum possible number of bits if you have any confusion in choosing the size of a drill bit.
For home jobs, the most common are 1/16″& 1/4″. Most of the kits have an addition (order) of 1/2″ in other sizes like 5/16″, 3/8″, and 7/16″.
Drill Machine Compatibility
Make sure the drill bit set you are going to buy should be compatible with your drill machine. For this, I can give a small tip that you should know the maximum/minimum chunk size of your drill machine. The other you can adjust, Though this is quite OK to take any for normal use.
Types Of Drill Bits
These are unlimited types of drill bits, from common to customized ones. For the homeowners/common users, we can discuss a few types…
- Masonry Bits: These drill bits are used for most common purposes like concrete blocks & masonry work.
- Twist Drill Bit: This one is mostly used to drill through wood, plastic, or thin metals.
- Step Drill Bit: This type of drill bit is used for drilling through thin metals. It can drill through 1/4″ thick metals efficiently.
- Brad Point Drill Bit: Best type when you are working through woods as its fluted edge helps to clear away chipping as the bit drills into the material.
- Installer Bit: This is best when doing an electrical type job. It can handle plaster, concrete, and wood at the same time. These are bit longer bits, usually 12″ to 18″ in length.
- Spade bits: These are used for woods when drilling through a large hole…
- Auger bits: This type is also good for woods and is operated at a very low RPM.
Most people have a set of drill bits in their toolbox. Usually, it is a straight twist set that can be used on either metal or wood. This type of drill bit is inexpensive, and some can be sharpened. While you may never need another type of drill bit, some additional ones could make your next task a bit easier.
Also, make sure to watch the video here about Bits for Hardened Steel.
Common Types of Drill Bit
The following are the most common ones around.
- HSS Twist Drill
- Brad Point Drill Bit
- Forstner Drill Bit
- Hole Saw
- Spade Drill Bit
- Masonry Drill Bit
- Countersink Drill Bit
Let see a small introduction of all these common drill bits.
HSS Twist Drill
This is the most common type of drill bit. This is designed for metal but can be used for wood and plastic. The full form is High-Speed Steel. It contains a uniform chamfered tip.
Brad Point Drill Bit
This is designed for drilling holes in wood but also can be used for plastic and soft material. It has a pointy tip. You will get a neat hole than that of twist bit. It will not wander but give you a better concentration.
Forstner Drill Bit
These are used for boring large diameter holes in wood (plastic cut sometimes). It is recommended over a spade bit under normal circumstances. It produces a clean exit.
It cannot be stopped and must go through the materials once they started. It gives the best result for larger holes in wood and plastic. It consists of two parts the outer Saw section is connected to into the pilot twist bit part.
Spade Drill Bit
It produces holes rapidly but not that cleaner. A flat profile characterizes it.
Masonry Drill Bit
It is widely used for drilling through concrete and brick or block. It has an arrow-shaped tip and usually has a shiny silver finish.
Countersink Drill Bit
It is used to countersink holes in metals, wood, and plastic. This allows the fasteners to sit under the surface of the piece.
Let us see information about more Drill Bits
Add a Set of Masonry Bits
Masonry bits are used for drilling stone, brick, or tile, and you might be surprised at how often you’ll use one. It makes quick work of drilling through these types of materials, but you will want to keep it sharp. Using a lubricant is also necessary to keep the heat low when drilling. Remove the drill bit frequently to get the removed material out of the hole. You can find these bits in a variety of sizes for just about any job.
Countersink Bits Save You Time
If you’re going to need to countersink screws, then a countersink bit can save you some time. These bits will not only drill the hole you need but also leave an area at the top to leave the screw set flush with the material’s surface. These can make any project a bit more attractive when finished.
Diamond Core Bits
These are used for drilling glass but are not as durable as a tungsten carbide bit, which may also be used. These bits are rather expensive, as is the tungsten carbide. Diamond bits cannot be sharpened, and you’ll use two of these bits to one of the carbide bits. However, they are very effective when you need a light touch for drilling glass.
The specialty of Drill Bits
If you have a home shop that you spend a lot of time in, you might want to start collecting some of the available specialty drill bit types. Because some of these bits can be quite expensive, it’s best to do a bit of comparison shopping or wait until you find a good sale.
You should purchase the higher quality bits, as you’ll have less chance of breaking them, but also because some have a lifetime warranty.
Drill bits can be made from several different materials, such as tungsten carbide, diamond, and high-speed steel.
Each has its own uses, and all are not generally designed for simply drilling a hole in your wall. Some are made to be used for drilling metals, glass, brick, tile, and stone. Others work best when used to drill wood or softer materials.
Choosing the Right Drill Bit Types
Just as you wouldn’t use a sledgehammer to hang a fine art piece, you do not want to use the wrong drill bit for any project.
There is so much information available online about the different drill bit types, so it’s not hard to figure out which ones you’ll need for a certain project.
If you can’t find the information you need, stop by your local hardware store, as they should help you.
Consider the type of material you will be drilling, what type of drill you will use, and how big and deep the holes need to be. Since there are so many sizes available, you will probably find exactly the right size.
Some bits can handle drilling up to ten or twenty times their diameter, but the cause should be used with the finer bits, as they can break.
When drilling into certain materials, you will need to use a lubricant. Some of the more expensive drill bits have a lubricant already treated onto the bit, and some machines automatically add the required lubricant.
When drilling glass, water can be used to cool the bit, too. These are just a few things that you should keep in mind when drilling.
Other Drill Bit Types
You’ll find other bits that can help you do what you need to do. Bullet pilot point bits, flat wood bits, hole saws, Forstner bits, and wood auger bits are just a few.
The sizes of these bits will vary, but many sizes are considered standard. These are generally what you will find in drill bit sets. There are both traditional measurements and metric measurements available.
Things to Keep
When you are putting together a collection of drill bits, those mentioned above will probably handle most of your needs. If you find you need one of the specialty drill bit types, it won’t be difficult for you to locate it.
A simple search online will give you several suppliers, and your local hardware store is always an option, too.
With all of the drill bit types available today, it can be confusing to determine which one you will need. However, each drill bit will be labeled as to what it should be used for and what it should not be used for.
These are meant to be safety precautions, so it’s best to pay attention to these warnings.
Finally, I would recommend you to go through all the specifications in detail. You can also read the customer reviews at Amazon as well. Make sure to understand your project need the budget.
If your projects are for the long run, make sure to get any coated drill bit. If you are going for only house jobs, see the cleanliness and the Universal type drill bits.
I am no such a bit available, but you can choose that has maximum profile materials. High-speed steel with cobalt addition is best as a base material. On top of it, you can choose any relevant coating like Titanium, Oxide, Nitride, Carbide as per your need.
Good luck & that for making it till the end.
Top FAQ’s for Choosing a Drill Bit
What is the difference between the 135 & 118 point angle bit?
See 118 is considered is for the general purposes drill bit, and the 135 point drill bit is for engineering shop works. Also, the 135-degree angle is the best for harder, while 118 works well on abrasive materials. For example, a porcelain tile with a hard layer at the top 135 degree points is good, while drilling in a block wall 118 is fine.
135 degree helps for quick penetration and no walking or wandering.
What is a Countersink Drill Bit?
A countersink drill bit is good for hiding the screw head. These drill bits help smooth the finish by letting the screw head sink in the wood or metal surface.
If you see in the picture here, the first screw head is visible, then we widen the Pilot Hole with Countersink drill bit, and now it will hide, and later we can do more finishing for an extreme level of decoration.
This drill bit is a must to have for a DIY’s toolbox in any case.
What is the difference between Countersink and Counter-bore Drill Bit?
Both countersink and counter-bore drill bits help settle screw, bolt, or the fastener to settle with a workpiece. The counterbore drill bit is used to creates a flat-bottom cavity that helps the screw head, bolt, or washer to rest totally within the counter-bore.
How long do you want to keep it?
Are you the kind of person that likes to buy a new drill bit set when a bit wears out? Or do you like to sharpen your bits and keep using them for a long time? Depending on this, you can look into buying a slightly more expensive set that will last you a long time, or you can buy something cheap. Your choices are numerous.
How much do you want to pay?
A drill bit set can cost anywhere from a few dollars to a few hundred dollars. You have to decide how much you want to pay and decide to pick one within the price range you want. Though the project might constrain you, you are working on it. If the project and surfaces you are working on call for a cobalt drill bit set, you will have to spend a little extra money to get what you need.
How many drill bits do you want in the set?
A set can contain from two to a hundred or so drill bits. The set that has fewer bits are usually for a specific purpose and specific sizes. Many bits cover many different uses and include differing drill bit sizes within the different kinds of drill bits. Know the types of your project?
As a final note, think about the following: – The types of projects you will be working on – The types of materials/surfaces you will be working on – the size of holes you want to drill The answers to these questions will tell you which drill bit set you should purchase.
What type of drill bit is best for wooden jobs?
The most common are;
- Spade bits
- Twist bits
- Brad-point bits
- Auger bits
- even the step bits
What is a chuck size?
The slot in the drill machine where you fix the drill bit. It is normally 10mm for cordless drill machines.
What is the most common drill bit size?
These are available in millimeters & inches. The drill bit common sizes are of the range from 1/16″ to 2″.
Can we use a drill bit for planting trees?
Yes, a Planter Auger is used for this purpose. Read more here, Dirt Auger Drill Bit.
How to avoid breaking off a drill bit?
Use the right drill for the right job. Don’t apply pressure while drilling. Keep the drill machine steady (perpendicular unless advised otherwise) and follow the operating manuals’ instructions.
What kind of bits need hardened steel?
Normally we use Cobalt steel alloy for hardened steel.
How To Use a Drill Bit?
You normally need a drill bit machine (electric cordless or stationary press). Fix the drill in the chuck. Check the hammer operation. Follow the operational manual for more information.
How To Sharpen Metal Drill Bits?
You can buy sharpening tools or can do it manually. You just need to hold at 59 degrees normally. Better use the drill bit sharpening tool. You can read more here, Drill Bit Sharpeners.
How To tell if the drill bit is for Metal or Wood?
Normally, a wood drill bit is Spade Drill Bit, Forstner Drill Bit, Brad-point, etc. A metal drill bit can be used to drill wood as wood is quite soft against steel. But you need to choose as per your project.
How to take care of Drill Bits?
- Extra care can increase the life of your drill bits for quite a long. Just follow these steps;
- Know the Materials Hardness
- Wipe off the bit frequently during the process.
- Apply lubrication during operation.
- Make sure to clean the bits after use.
- Use a sharpener when required.
What Does a Metal Drill Bit look like?
The most common twist drill bit can be a metal drill bit. There are many customized drill bits.
What is Flexible Drill Bit Extension?
A flexible drill bit extension covers the blind area like in electrical cabinets where the normal screwdriver cannot reach we use these extensions. You can read about Flexible Drill Bit Extensions.